The eyes of the drill is a tool that serves to make a hole in the wall, wood, plastic, iron, metal and glass. Lots of types and sizes of holes that can be made with a different type of drill, different anyway. Therefore we need to use the eyes of drill that is not only nice but can hollow out any good it basic iron, timber, concrete quickly and easily.

Keeping the eyes of drill is very important because it will affect the speed in membor object and take a long time if the operation when the pad eye damaged and not sharp drill again. The following tipsuntuk take care not to drill the eye quickly broke down. https://www.teknikmart.com/mesin-las.html

‍

The material on the Drill

We need to know what objects we will lubangi with a drill, because the harder the material the material object then the slow rotation of the engine on demand. The standard speed for hollow wood is 0-2600 rpm, while the material punching holes for stainless steel is 0-2900 rpm.

‍

Rotation Of The Engine (RPM)

Use the right drill when the eye wants to hollow out the objects by selecting the eyes of drill that can be adapted to the thickness and material of the object wanting to satin, because the larger the diameter of the drill in the eyes use sluggish then the rotational power and so otherwise.

‍

Cooling

Spray water when the eyes of the drill was doing a penggerusan on a material (usually metal materials), especially if you want to use in a long time, because the eyes of drill requires a cooling process in order to be durable and long lasting.

‍

Grinding (penggerindaan)

In order that the eye drill can last a long time. Please check again whether you have proper asahan results or not, because the shape of the side pieces that are less good will cause damage to the eye as the drill quickly blunt, tasted the hard material, the result of holes that are not nice and fast heat.

Source: https://www.teknikmart.com/